HardieDrive® Screws
Class 3 self tapping wing tipped screw 32mm long. For light gauge steel frame 0.8mm to 1.6mm thick.
Selling unit: 1000 per box.
JH Joint Sealant
Multi purpose polyurethane based sealant used for control joints and movement joints.
Selling unit: 20 per box
300ml cartridge
*Not to be used in impact and/or fire applications.
HardiePlank™ weatherboard Zincalume Footmould 3m
Zincalume starter strip to kick out bottom row of planks at correct angle for 7.5mm HardiePlank™ weatherboard.
Selling unit: 10 per pack
Length: 3000mm
HardiePlank™ weatherboard Galv Soaker Joiner
Concealed metal jointer used as alternative to PVC Jointers. 205mm / 230mm / 300mm
Selling unit: 25 per box
HardiePlank™ weatherboard Aluminium External Corner Angle
Aluminium external corners which conceals external corner. 230mm / 300mm
Selling unit: 100 per box
HardiePlank™ weatherborad Aluminium Internal Corner Angle
Aluminium internal corners which conceals internal corner. 230mm / 300mm
Selling unit: 100 per box
HardiePlank™ weatherboard Galv Stud Clips
Galvabond stud clips used to automatically set 25mm lap.
Selling unit: 100 per box
HardieBlade™ Saw Blade
Ø 185mm Poly diamond blade, for fast, clean cutting of James Hardie cellulose reinforced cement.
Selling unit: each
JH Score and Snap Knife
Tungsten tipped knife for scoring of fibre cement sheets.
Selling unit: 10 per pack
Fibreshear
Electric cutting tool.
Selling unit: each
HardiePlank™ Smooth PVC Joint
PVC smooth joining strips.
230mm/300mm
Selling unit: 25 per pack
HardiePlank™ Woodgrain PVC Joint
PVC textured joining strips.
230mm / 300mm
Selling unit: pack of 25
PrimeLine® weatherboard Aluminium Snap On Corner Two Part
Aluminium snap on corner for internal and external corners of HardiePlank™ weatherboard and PrimeLine® weatherboard.
Length: 3000mm
Can the Metal Soaker, Stud Clips or Uni Clip be used in a salt affected area?
No, in these applications/environments the appropriate fasteners must be used and the HardiPlank® Cladding & PrimeLine should be joined on stud.
When installing HardiePlank™ cladding to a timber frame, should the fibre cement nail pass through both planks?
Yes, the fibre cement nail must pass through both planks, 12 mm above the bottom edge with a 25 mm overlap.
When installing HardiePlank™ cladding to a steel frame, should the HardieDrive™ screw pass through both planks?
No, HardiDrive screw must be fixed 30 mm above the bottom edge through the top plank only.
How can I join HardiePlank™ off stud without using the PVC jointers?
Metal Soakers are available for the HardiePlank™ range (except Shingled Siding). These provide a less visible join.
When installing HardiePlank™ Cladding / PrimeLine Weatherboards, is it best to install each wall individually, or install around the house perimeter?
The HardiePlank™ Cladding / PrimeLine® Weatherboards should be installed around the perimeter of the building then up the wall checking every 4th board to ensure they are correctly levelled and spaced.
I have noticed that some other cladding materials are only available in 3.6m lengths. Is HardiePlank™ available in longer lengths?
Yes, to minimise joins HardiePlank™ Cladding is only available in 4.2m lengths.
Can I ‘secret nail’ HardiePlank™ cladding onto a timber frame?
No, It is recommended to fix through the overlap using a 40mm x 2.8mm galvanised Fibre cement nail. If you would like to conceal the fixings refer to the PrimeLine® Summit or Newport profiles.
Can I use HardiePlank™ Shingled Siding as a roofing material?
No, HardiePlank™ Shingle Siding has been developed for walls only.
