James Hardie™ Score and Snap Knife

A tungsten tipped knife for scoring fibre cement sheets.

SAP: 305576  Selling Unit: 20 per box


James Hardie™ Fibreshears

Electric tool for cutting fibre cement sheets.

SAP: 300653  Selling Unit: 1 each


HardieBlade™ Saw Blade

A poly-diamond blade for fast and clean cutting of James Hardie fibre cement

Length: 185mm  SAP: 300660  Selling Unit: 1 each
Length: 254mm  SAP: 303375  Selling Unit: 1 each


James Hardie™ Joint Sealant*

A general purpose, paintable, exterior grade polyurethane joint sealant*.

300ml cartridge  SAP: 305534  Selling Unit: 20 per box
600ml sausage  SAP: 305672  Selling Unit: 20 per box

*Not recommended for use in fire applications


James Hardie™ Aluminium Snap On Corner. 3,000mm long (2 pieces per set)

A ready to paint aluminium extrusion set, to be used with Easylap™ panel, Scyon™ Axon™ cladding, HardiePlank™ and PrimeLine® weatherboards, at internal and external corner junctions to conceal the board edge.

Length: 3,000mm (2 pieces per set)  SAP: 305513  5 sets per pack


Vacuum extraction with HEPA filter

Used with HEPA filter and paper bag for reduced dust exposure.

Required accessory NOT supplied by James Hardie
 


ND 50mm stainless steel brad nails

14 gauge x 50 mm brad 304 stainless steel nail for fixing Scyon™ Axon sheets to timber frames.

Required accessory supplied by James Hardie
 


James Hardie™ 50mm wide Foam Back Sealing Tape

A self-adhesive foam tape to help improve water tightness with EasyLap™ panel and Scyon™ Axon™ cladding. It is applied under sheet joins to the vapour permeable membrane along the stud face.

Length: 25metres  SAP: 304560  Selling Unit: 1 each


Fibre cement nail

40 x 2.8mm galvanised fibre cement nail.

Required accessory NOT supplied by James Hardie


Circular Saw

Dust reducing circular saw used with HardieBlade™ saw blade.

Makita: 5057KB
Hitachi: C7YA
 


James Hardie™ 75x75mm Colorbond® Corner Flashing

A Colorbond® corner flashing for use behind cladding at internal and external corners.

Length: 3,000mm  SAP: 305564  Selling Unit: 5 per pack


James Hardie™ 9mm Aluminium Internal Corner

A ready to paint aluminium extrusion, to be used with EasyLap™ panel and Scyon™ Axon™ cladding, at internal corner junctions to conceal the board edge.

Length: 3,000mm  SAP: 305520  Selling Unit: 5 per pack


James Hardie™ 9mm Aluminium External Corner

A ready to paint aluminium extrusion, to be used with EasyLap™ panel and Scyon™ Axon™ cladding, at external corner junctions to conceal the board edge.

Length: 3,000mm  SAP: 305521  Selling Unit: 5 per pack


James Hardie™ 9mm Aluminium Horizontal h Flashing

A ready to paint aluminium horizontal flashing, to be used with EasyLap™ panel and Scyon™ Axon™ cladding, for horizontal control joints.

Length: 3000mm long  SAP: 305613  Selling Unit: 5 per pack


James Hardie™ 9mm Aluminium Horizontal h Jointer

A ready to paint aluminium jointer, used to join the James Hardie™ 9mm Aluminium Horizontal h Flashing.

Length: 100mm  SAP: 305614  Selling Unit: 10 per bag


HardieWrap™ weather barrier

A non-perforated, highly breathable and reflective safe-glare weather barrier designed to be used behind James Hardie® external cladding products to help protect the building.

Length: 2,750mm x 30,000mm   SAP: 305664   Selling Unit: 1 Roll

Click Here to find out more.


HardieDrive™ Screw 41mm

A class 3 self-tapping wing-tipped screw for fastening to 0.5mm to 1.6mm BMT lightgauge steel frames.

 

Length: 41mm SAP: 305984 Selling Unit: 1000 per box

 

*The 41mm HardieDrive™ Screw is required for all external cladding thickness based on the use of James Hardie™ 12mm HardieBreak™ thermal strip to satisfy building code requirements


HardieDrive™ Collated Screw 41mm

A class 3 self-tapping wing-tipped screw for fastening to 0.5mm to 1.6mm BMT lightgauge steel frames. Suitable for use in most auto feed screw guns

 

Length: 41mm SAP: 305982 Selling Unit: 1000 per box

 

*The 41mm HardieDrive™ Screw is required for all external cladding thickness based on the use of James Hardie™ 12mm HardieBreak™ thermal strip to satisfy building code requirements