HardieBlade™ Saw Blade

A poly-diamond blade for fast and clean cutting of James Hardie fibre cement

Length: 185mm  SAP: 300660  Selling Unit: 1 each
Length: 254mm  SAP: 303375  Selling Unit: 1 each


James Hardie™ Joint Sealant*

A general purpose, paintable, exterior grade polyurethane joint sealant*.

300ml cartridge  SAP: 305534  Selling Unit: 20 per box
600ml sausage  SAP: 305672  Selling Unit: 20 per box

*Not recommended for use in fire applications


Vacuum extraction with HEPA filter

Used with HEPA filter and paper bag for reduced dust exposure.

Required accessory NOT supplied by James Hardie
 


Compound mitre saw

Dust reducing compound mitre saw used with HardieBlade™ saw blade.

Makita: LS0714 / LS1013 / LS1212
Hitachi: C10FSB / C10FSM

Required accessory NOT supplied by James Hardie.


Gun nails and nailer

Suitable gun nails and nailers for concealed fixing to timber framing. Minimum nail length of 40mm is required.

Required accessory NOT supplied by James Hardie


Scyon™ Stria™ Vertical Flashing Stop

For use with Scyon™ Stria™ cladding behind boards at vertical joints.

Length: 3,000mm  SAP: 305547  5 per pack or 1 each


Scyon™ Stria™ Aluminium External Box Corner. 3,000mm long.

A ready to paint aluminium extrusion to be used with Scyon™ Stria™ cladding to create external boxed corners.

SAP: 305519
5 per pack

Required accessory supplied by James Hardie


Scyon™ Stria™ Aluminium Internal Corner. 3,000mm long.

A ready to paint aluminium extrusion to be used with Scyon™ Stria™ cladding to create internal corners.

SAP: 305518
5 per pack

Required accessory supplied by James Hardie


James Hardie™ 75x75mm Colorbond® Corner Flashing

A Colorbond® corner flashing for use behind cladding at internal and external corners.

Length: 3,000mm  SAP: 305564  Selling Unit: 5 per pack


Bostik Seal ‘N’ Flex 1

A suitable replacement for where James Hardie joint sealant is specified (supplied in sausage form)

Required accessory NOT supplied by James Hardie


40 and 50 x 2.8mm fibre cement nails

Minimum Class 3
(see fastener durability section)
40mm for concealed fixing.
50mm for face fixing.

Required accessory NOT supplied by James Hardie


Quikdrive Collated Screw -CBSDG114-SA

32mm long Class 3 galvanised screw for fixing to 0.8-1.6mm BMT steel framing.

Required accessory NOT supplied by James Hardie


Bond Breaking Tape

Used behind sealant at joints, refer to the installation manual for more information.

Required accessory NOT supplied by James Hardie


HardieWrap™ weather barrier

A non-perforated, highly breathable and reflective safe-glare weather barrier designed to be used behind James Hardie® external cladding products to help protect the building.

Length: 2,750mm x 30,000mm   SAP: 305664   Selling Unit: 1 Roll

Click Here to find out more.


HardieDrive™ Screw 41mm

A class 3 self-tapping wing-tipped screw for fastening to 0.5mm to 1.6mm BMT lightgauge steel frames.

 

Length: 41mm SAP: 305984 Selling Unit: 1000 per box

 

*The 41mm HardieDrive™ Screw is required for all external cladding thickness based on the use of James Hardie™ 12mm HardieBreak™ thermal strip to satisfy building code requirements


HardieDrive™ Collated Screw 41mm

A class 3 self-tapping wing-tipped screw for fastening to 0.5mm to 1.6mm BMT lightgauge steel frames. Suitable for use in most auto feed screw guns

 

Length: 41mm SAP: 305982 Selling Unit: 1000 per box

 

*The 41mm HardieDrive™ Screw is required for all external cladding thickness based on the use of James Hardie™ 12mm HardieBreak™ thermal strip to satisfy building code requirements