A sleek, aluminium external corner with a sharp, minimal edge. It holds the panels tight with just 3.5mm of coverage. It suits 8.5mm thick cladding panels.	Cut panels between 45 to 60 degrees angle for better adjustment.

__Key Features__
- Compatible with [Hardie™ Fine Texture Cladding](https://www.jameshardie.com.au/productrange/hardie-fine-texture-cladding) and [Hardie™ Brushed Concrete Cladding](https://www.jameshardie.com.au/productrange/hardie-brushed-concrete-cladding)
- Creates a sharp and modern edge at corners
- Ready to paint after installation

hardie-9mm-aluminium-external-slimline-corner-306102-jameshardie

Hardie™ 9mm Aluminium External Slimline Corner 3000mm

Hardie™ 9mm Aluminium External Slimline Corner 3000mm by James Hardie. A sleek aluminium exterior corner with a sharp, basic edge that prioritises design.

Hardie™ 9mm Aluminium External Slimline Corner 3000mm | Accessory by James Hardie

A 3000mm long aluminium extrusion that replicates the traditional sealant bead look. Suitable for installation with 8.5 - 9mm thick fibre cement cladding.

__Key Features__
- Used at internal corner junctions to conceal the edge of the board
- Curved inwards to fit neatly into the internal corners
- Ready to paint after installation
- Easy to install

hardie-9mm-aluminium-internal-concave-corner-306103-jameshardie

Hardie™ 9mm Aluminium Internal Concave Corner 3000mm

Hardie™ 9mm Aluminium Internal Concave Corner 3000mm by James Hardie | Extrusion of aluminium that looks like a typical sealant bead.

Hardie™ 9mm Aluminium Internal Concave Corner 3000mm | Accessory by James Hardie

An architectural slab edge solution. Fabricated from high-quality powder-coated aluminium. It provides a premium finish when installed at the base of compatible [Hardie™ exterior cladding](https://www.jameshardie.com.au/categories/cladding) products.

__Key Features__
- Made from powder-coated aluminium
- Sable™ Brilliance in colour (dark grey)
- Easy to install

Hardie™ Edge Base Trim

Hardie™ Edge Base Trim 3950mm

Hardie Edge Base Trim 3950mm - A powder coated 3950mm long aluminium extrusion by James Hardie used on slab edges. Colour: 'Sable Brilliance' (dark grey)

Hardie™ Edge Base Trim 3950mm | Accessory by James Hardie

A ready to paint aluminium extrusion, to be used at internal corner junctions to conceal the board edge with a strong, clean line.	

__Key Features__
- Install and paint on the same day
- Made from durable aluminium
- Easy to install

hardie-9mm-aluminium-internal-corner-305520-jameshardie

Hardie™ 9mm Aluminium lnternal Corner 3000mm

A ready to paint aluminium extrusion, to be used at internal corner junctions to conceal the board edge.

Hardie™ 9mm Aluminium lnternal Corner 3000mm | Accessory by James Hardie

Manufactured using Colorbond® steel for use behind cladding at internal and external corners.	

__Key Features__
- Corrosion resistant
- Can be used with most Hardie™ exterior cladding junctions
- Can be used as general flashing

hardie-75x75-colorbond-corner-flashing-3000mm-305564-jameshardie-1

Hardie™ 75x75mm Colorbond® Corner Flashing 3000mm

A Colorbond® corner flashing for use behind cladding at internal and external corners. Length: 3000mm

Hardie™ 75x75mm Colorbond® Corner Flashing 3000mm | Accessory by James Hardie

A ready to paint, 3000mm long aluminium horizontal flashing to be used for horizontal control joints.	

__Key Features__
- Compatible with [Axon™ Cladding](https://www.jameshardie.com.au/productrange/scyon-axon-cladding)
- Used to join Axon™ Cladding sheets horizontally
- Ready to paint after installation

Hardie™ Aluminium Horizontal h Flashing of 9mm

Hardie™ 9mm Alum Horizontal h Flashing 3000mm

A ready to paint aluminium horizontal flashing to be used for horizontal control joints. Length: 3000mm


Hardie™ 9mm Alum Horizontal h Flashing 3000mm | Accessory by James Hardie

A ready to paint aluminium jointer, used to join the [Hardie™ 9mm Aluminium Horizontal h Flashing](https://www.jameshardie.com.au/accessory/james-hardie-9mm-aluminium-horizontal-h-flashing).

__Key Features__
- Made from quality aluminium
- Ready to paint after installation
- Comes in a pack of 10

hardie-9mm-aluminium-horizontal-h-jointer-305614-jameshardie

Hardie™ 9mm Alum Horizontal h Jointer

Hardie 9mm Aluminium Horizontal h Jointer - A ready to paint aluminium jointer, used to join the James Hardie 9mm Aluminium Horizontal h Flashing.

Hardie™ 9mm Alum Horizontal h Jointer | Accessory by James Hardie

A self-adhesive foam tape to help improve water tightness. It is applied under sheet joins to the vapour permeable membrane along the stud face.

__Key Features__
- Used when direct fixing Hardie™ external cladding products to a timber frame
- Adds another layer of moisture control in the wall system
- Compatible with [Axon™ Cladding](https://www.jameshardie.com.au/productrange/scyon-axon-cladding), [EasyLap™ Panel](https://www.jameshardie.com.au/productrange/easylap-panel), [Hardie™ Fine Texture Cladding](https://www.jameshardie.com.au/productrange/hardie-fine-texture-cladding), [Hardie™ Brushed Concrete Cladding](https://www.jameshardie.com.au/productrange/hardie-brushed-concrete-cladding) and horizontal installation of [Stria™ Cladding](https://www.jameshardie.com.au/productrange/stria-cladding-smooth) and [Hardie™ Oblique™ Cladding](https://www.jameshardie.com.au/productrange/hardie-oblique-cladding)


Hardie™ 50mm Foam Back Seal Tape

Hardie™ 50mm Foam Back Sealing Tape 25m Roll

A self-adhesive foam tape to help improve water tightness. It is applied under sheet joins to the vapour permeable membrane along the stud face.

Hardie™ 50mm Foam Back Sealing Tape 25m Roll | Accessory by James Hardie

A general purpose, paintable, exterior grade polyurethane joint sealant. It comes in tubes or sausages. Note: Not recommended for fire applications.

__Key Features__
- It acts as a joint sealant as well as a construction adhesive
- An essential item when installing any Hardie™ fibre cement product
- Ready to paint after installation


jointsealant-300ml-305534-jameshardie

Hardie™ Joint Sealant 300ml Cartridge

Hardie™ Joint Sealant 300ml Cartridge - Exterior polyurethane joint sealant, general purpose by James Hardie.

Hardie™ Joint Sealant 300ml Cartridge | Accessory by James Hardie

A general purpose, paintable, exterior grade polyurethane joint sealant. It comes in tubes or sausages. Note: Not recommended for fire applications.

__Key Features__
- It acts as a joint sealant as well as a construction adhesive
- An essential item when installing any Hardie™ fibre cement product
- Usable with a caulking gun
- Ready to paint after installation


Hardie™ Joint Sealant Sausage

Hardie™ Joint Sealant 600ml Sausage

A general purpose, paintable, exterior grade polyurethane joint sealant. 

Hardie™ Joint Sealant 600ml Sausage | Accessory by James Hardie

An aluminium external square corner that offers 10mm coverage. Suitable for installation with 8.5 – 9mm thick cladding panels.

__Key Features__
- Compatible with [Hardie™ Fine Texture Cladding](https://www.jameshardie.com.au/productrange/hardie-fine-texture-cladding), [Hardie™  Brushed Concrete Cladding](https://www.jameshardie.com.au/productrange/hardie-brushed-concrete-cladding) and [Axon™ Cladding](https://www.jameshardie.com.au/productrange/scyon-axon-cladding)
- Easy to install
- Ready to paint after installation

Hardie™ 9mm Aluminium External Square Corner 3000mm

hardie-9mm-aluminium-external-square-corner-306100-jameshardie

Complete your exterior design with Hardie™ 9mm Aluminium External Square Corner 3000mm. Durable and easy to install, it adds a sleek finishing touch to your home.

Hardie™ 9mm Aluminium External Square Corner 3000mm | Accessory by James Hardie

Achieve a modern, minimalist aesthetic with Hardie™ Fine Texture Cladding. The smooth, natural sand texture adds warmth and diffuses light, giving your new home, renovation or extension a fine matte finish.

Hardie™ Fine Texture Cladding is a pre-textured fibre cement panel. It’s durable and lower maintenance than traditional cement render to stay looking good for many years to come.

hardie-finetexturecladding-modern-exterior-mountsaintthomas-jameshardie-rgb-2

Loved by the trade for better building.

Hardie™ Fine Texture Cladding is an efficient and cost-effective alternative to render as it saves time, trades and call-backs

hardie fine texture cladding texture close-up hand white jameshardie

405252

405255

405253

405254

Get a modern yet bold look, without the hassles of render. Hardie™️ Fine Texture Cladding puts emphasis on form and buildability, with the texture of fine fibre cement render which can be painted any colour.

Hardie™ Fine Texture Cladding for Trade | Wall Cladding Panel Solutions by James Hardie Australia

save-on-costs

average costs

hftct

Save on Costs

save on time

Hardie™ Fine Texture Cladding

Save on Time

save on callbacks

SAVE ON CALLBACKS

See how builders are finding Hardie Fine Texture Cladding as a solution for their projects to deliver on their clients homes

Save On Callbacks

HFTC Serious Savings

Hardie™ Fine Texture Cladding trade brochure

Hardie Fine Texture & Brushed Concrete Cladding Installation Guide Oct23

installation-guide

Hardie™ Fine Texture Cladding Installation Guide

James Hardie 25 Years Product Warranty June 2024

warranty

Hardie™ Fine Texture Cladding Warranty

codemark-certification

Hardie™ Fine Texture Cladding Codemark Certification

Best Practice Guide June 2020

best-practice-guide

James Hardie Best Practice Guide

Download your James Hardie BIM content - High-quality BIM and CAD content from James Hardie

James-Hardie-BIM-Content-Downloads-icon

BIM downloads

Hardie™ Fine Texture Cladding Trade

In this video, we show you the installation methods and a walk through the steps to deliver a quality finish with Hardie™ Fine Texture Cladding

Hardie™ Fine Texture Cladding.

The beauty of clean lines and a modern look